With the introduction of
DynamicBlack™ , the projector delivers high contrast ratio of
2100:1 for superior image display
capability, particularly
to express the vivid details in dark images.
*
DynamicBlack™ works only in 2-Lamp Mode.
WXGA chip for wide-format images
The projector's WXGA chip (1,280 x 768) displays the same wide-format WXGA resolution images such as laptop computers and DVDs.
Dual lamp system provides high brightness of 4500 ANSI lumens. Continuous use is also possible when using a single lamp mode.
By employing a dual lamp system, high brightness of 4500 ANSI lumens has been achieved. This is sufficient when high brightness is required in large venues.
Furthermore, in the Single lamp mode, since the projector can be operated continuously by using the automatic lamp switching function, it is suitable for monitoring purposes. Lamp Eco mode is available in both the dual lamp and single lamp modes for extending the service life of the lamp.
Two types of
Replaceable Colour Wheel and BrilliantColor™ technology
project vivid images
The NP4001 has a six-segment (red,
green, blue, cyan, magenta, and yellow) colour wheel, in
addition to the standard four-segment (red, green, blue, and
white) colour wheel - and the colour wheels can be changed by
the customer. The BrilliantColor™ results in
superior reproducibility of neutral tints for vivid images of
natural scenery. By adding cyan,magenta and yellow to red,
blue, and green, colour reproducibility is improved and more
natural tints are projected.
* The brightness when using
the six-segment colour wheel is about 67% of the brightness
when using the four-segment colour wheel.
High connectivity supporting several different image sources
Units are equipped with DVI-D, component, and RGB input/output terminals. Integrated 3W+3W stereo speakers make it possible to output sound together with images
The power can be controlled intensively with Auto Start and Direct Power Off
The NP4001 starts projecting images automatically when electric power is supplied. Turn off the power source with a switch or a circuit breaker while projecting images or running the fan. With these functions, it is possible to completely control the power of the projector with the power distribution board.
Five types of lenses selectable for the installation environment
Five different lenses are available to support a variety of uses. The projector supports screens from 40 to 500 inches; select the optimum lens depending on the specific installation environment, such as conference rooms, halls, and exhibitions. For a 100-inch screen, projection is possible at a distance 1.7 m (short fixed focus lens) or between 2.9 m to 18.6 m. Lenses are easily replaced by the customer and do not require special tools.
(Note: Lenses are not attached to the NP4001 main unit.)
Model
NP06FL
NP07ZL
NP08ZL
NP09ZL
NP10ZL
Lens type
Short Focus Fixed Lens
Zoom Lens
Zoom Lens
Zoom Lens
Zoom Lens
Option Lens
Zoom/Focus
Power (Focus
Only)
Power
Power
Power
Power
Zoom Ratio
1.00
1.34
1.32
2.00
1.87
Throw Ratio
0.77 : 1
1.33 - 1.79 : 1
1.78 - 2.35 : 1
2.22 - 4.43 : 1
4.43 - 8.3 :
1
Lens Shift
Vertica
0
Max +0.5V
Max +0.5V
Max +0.5V
Max +0.5V
Horizontal
0
Max ±0.1H
Max ±0.1H
Max ±0.1H
Max ±0.1H
Weight
1.0kg
1.1kg
0.8kg
1.1kg
0.9kg
Screen Size
50 - 200inch
40 - 500inch
40 - 500inch
40 - 500inch
40 - 500inch
Brightness*
2-Lamp Mode
3700 ANSI lm
4100 ANSI lm
4500 ANSI lm
4100 ANSI lm
3200 ANSI lm
1-Lamp Mode
1800 ANSI lm
2000 ANSI lm
2200 ANSI lm
2000 ANSI lm
1600 ANSI lm
* This is the brightness in Normal Mode. If the lamp mode is set to Eco Mode, brightness is reduced by 85% of Normal Mode.
Projection range of lens (image projected on a 100-inch screen)
Throwing Distance
(Unit : m)
Screen Size
(Inch)
Throwing Distance
NP06FL
NP07ZL
NP08ZL
NP09ZL
NP10ZL
40"
-
1.15-1.57
1.55-2.06
1.92-3.94
3.85-7.36
50"
0.85
1.45-1.97
1.95-2.59
2.43-4.95
4.85-9.23
60"
1.03
1.75-2.38
2.35-3.12
2.94-5.96
5.85-11.11
80"
1.38
2.35-3.19
3.15-4.18
3.95-7.98
7.84-14.86
100"
1.74
2.95-3.99
3.96-5.24
4.97-10.00
9.84-18.60
120"
2.10
3.56-4.80
4.76-6.30
5.98-12.02
11.83-22.35
150"
2.63
4.46-6.01
5.97-7.89
7.50-15.05
14.83-27.97
200"
3.52
5.96-8.03
7.97-10.54
10.04-20.10
19.81-37.34
300"
-
8.96-12.07
11.99-15.85
15.11-30.21
29.79-56.08
400"
-
11.97-16.11
16.01-21.15
20.18-40.31
39.76-74.82
500"
-
14.97-20.15
20.02-26.45
25.25-50.42
49.74-93.56
*Stated projection distances are standard values.
*The respective values are design values and may contain errors
within +/– 5%.
Powerd
lens shift mechanism for simple adjustment of projected images
on screen and Keystone correction
With the powerd lens shift mechanism, the position of projected images on screen can be adjusted in both the vertical and horizontal directions without moving the main unit. Furthermore, Keystone correction corrects distortions in the vertical and horizontal directions up to a maximum +/- 35 degrees in the horizontal direction and a maximum +/- 40 degrees in the vertical direction.
Since adjustment of lens zoom and focus, as well as Lens shift and Keystone correction, can be operated by remote control, the projector need not be installed within reach of the speaker.
Specifications
Model Name
NP4001
DLP Chip *1
Single DLP chip, 1,280 x 768 pixels
(Aspect Ratio 15 : 9)
Lens*2
Powered Zoom
/ Focus
NP06FL : Power focus, throw ratio 0.77 : 1,
F2.0 , f = 11.4mm
NP07ZL : Power zoom and focus, throw ratio 1.33 - 1.79 : F1.8 - 2.3 , f = 19.3 - 25.8mm
NP08ZL : Power zoom and focus, throw ratio 1.78 - 2.35 : 1, F1.7 - 1.9 , f = 26 - 34mm
NP09ZL : Power zoom and focus, throw ratio 2.22 - 4.43 : 1, F2.1 - 2.9, f = 32 - 63mm
NP10ZL : Power zoom and focus, throw ratio 4.43 : 8.3 : 1, F2.2 - 3.1, f = 63.5 - 117.4mm
Powered Sift
(NP07ZL, NP08ZL, NP09ZL, NP10ZL) *3
Horizontal : max ± 0.1 H / Vertical : max + 0.5 V
Projection
Distance
1.55 m to 26.45 m with NP08ZL
Projection
Angle
7.0 degree to 9.2 degree with NP08ZL *7
Lamp (Eco
Mode)
260 W (230 W) AC
Lamp Life *4 (Eco Mode)
2,000 H (2,500 H)
Light Output *5
Normal
Mode
4,500 ANSI lumens Dual Lamp with NP08ZL
2,200 ANSI lumens Single Lamp with NP08ZL
Eco Mode
Approx. 85 % of Normal
Contrast Ratio (White / Black)
1000 : 1 / 2,100 : 1 with DynamicBlack™ *6
Quietness
Normal
Mode
Eco Mode
36 dB Dual Lamp (34 dB Single Lamp)
34 dB Dual Lamp (30 dB Single Lamp)
Image Size (Diagonal)
50 inch to 200 inch (1.27 m to 5.08 m) (NP06FL)
40 inch to 500 inch (1.02 m to 12.7 m)
(NP07ZL, NP08ZL, NP09ZL,NP10ZL)
Maximum Resolution
UXGA (1,600 x 1,200)
Synchronization Range
Horizontal
15 kHz, 31kHz to 90 kHz (RGB : 31 kHz or over)
Vertical
50 Hz to 85 Hz
Video Bandwidth
RGB : 100 MHz ( - 3 dB)
Colour Reproduction
Full Colour, 16.7 Million Colours Simultaneously
Input Terminals
3 Computer
Input
1 D-Sub Mini 15pin (Computer 1 IN)
1 BNC x 5 (Computer 2 IN)
Compatible signals
VGA, SVGA, XGA, WXGA, SXGA, SXGA+, UXGA
RGB (Analog)
0.7 Vp - p / 75 Ω
H / V Sync
4.0 Vp - p / TTL Polarity
Composite Sync
4.0 Vp - p / TTL Level
Sync on G
1.0 Vp - p / 75 Ω Negative Polarity
2 Stereo Mini Jack
Stereo L / R
0.5 Vrms / 22 kΩ or over
1 DVI-D (Computer 3 IN)
RGB (Digital)
T.M.D.S Specification, with H.D.C.P , Max Resolution : SXGA+ / 60 Hz
1 Stereo Mini Jack
Stereo L / R
0.5 Vrms / 22 kΩ or over
2 Component
Input
1 RCA pin x 3
1 BNC x 5
(Sharing with Computer 2 IN)
Y
1.0 Vp - p / 75 Ω (with Sync), Terminal Y (Green) is Also Available for Video Input
EK(safety:K60950-1, EMC:K00022 Class B, K00024,K61000-3-2, K61000-3-3)
GB4943, GB9254, GB17625.1
Dimensions (W x H x D)
505 mm x 197 mm x 385 mm
(Not Including Protrusions)
Net Weight
16.5 kg (Not Including Lens)
*1
:
DLP Panel technology consists of fine picture cells with more than 99.99 % of the cells being active.
*2
:
Lenses are not attached to the NP4001 main unit.
*3
:
The Lens Shift function is not available for the NP06FL.
*4
:
Lamp life is defined as the average time span for the brightness of the lamp to be reduced by half, it dose not refer to the warranty period for the lamp.
*5
The brightness when using the six-segment colour wheel is about 67% of the brightness when using the four-segment colour wheel.
*6
DynamicBlack™ technology works only in 2 - Lamp Mode.
*7
When the Lens Shift is Set as 0 % (H) / Vertical Offset = 50 %, Throw Ratio = 1.78
All specifications are subject to change without notice.
High reliability from advanced technologies 
With the introduction of
DynamicBlack™ , the projector delivers high contrast ratio of
2100:1 for superior image display
capability, particularly
to express the vivid details in dark images.
