Dual lamp system projector with high brightness of
5200 ANSI lumens appropriate for large venues
DynamicBlack™ - High Contrast Ratio of 2100:1
Dual Lamp System - High Brightness of 5200 ANSI lumens
Two types of Replaceable Colour Wheel and
BrilliantColor™
High connectivity supporting several different image
sources
Five Optional Lenses
Powerd Lens Shift mechanism and Keystone Correction
Auto Start and Direct Power Off
The DLP Method and a 0.7-inch DLP chip are
employed
With the introduction of
DynamicBlack™ , the projector delivers high contrast ratio of
2100:1 for superior image display
capability, particularly
to express the vivid details in dark images.
*
DynamicBlack™ works only in 2-Lamp Mode.
Dual lamp system provides high brightness of 5200 ANSI lumens. Continuous use is also possible when using a single lamp mode.
By employing a dual lamp system, high brightness of 5200 ANSI lumens has been achieved. This is sufficient when high brightness is required in large venues.
Furthermore, in the Single lamp mode, since the projector can be operated continuously by using the automatic lamp switching function, it is suitable for monitoring purposes. Lamp Eco mode is available in both the dual lamp and single lamp modes for extending the service life of the lamp.
Two types of
Replaceable Colour Wheel and BrilliantColor™ technology
project vivid images
The NP4000 has a six-segment (red,
green, blue, cyan, magenta, and yellow) colour wheel, in
addition to the standard four-segment (red, green, blue, and
white) colour wheel - and the colour wheels can be changed by
the customer. The BrilliantColor™ technology results in
superior reproducibility of neutral tints for vivid images of
natural scenery. By adding cyan,magenta and yellow to red,
blue, and green, colour reproducibility is improved and more
natural tints are projected.
* The brightness when using
the six-segment colour wheel is about 67% of the brightness
when using the four-segment colour wheel.
High connectivity
supporting several different image sources
Units are equipped with
DVI-D, component, and RGB input/output terminals. Integrated
3W+3W stereo speakers make it possible to output sound
together with images.
The power can be controlled
intensively with Auto Start and Direct Power Off
The NP4000 starts projecting
images automatically when electric power is supplied. Turn off
the power source with a switch or a circuit breaker while
projecting images or running the fan. With these functions, it
is possible to completely control the power of the projector
with the power distribution board.
Five
types of lenses selectable for the installation
environment
Five different lenses are
available to support a variety of uses. The projector supports
screens from 40 to 500 inches; select the optimum lens
depending on the specific installation environment, such as
conference rooms, halls, and exhibitions. For a 100-inch
screen, projection is possible at a distance 1.6 m (short
fixed focus lens) or between 2.7 m to 17.1 m. Lenses are
easily replaced by the customer and do not require special
tools.
(Note: Lenses are not attached to the NP4000 main
unit.)
Model
NP06FL
NP07ZL
NP08ZL
NP09ZL
NP10ZL
Lens type
Short Focus Fixed Lens
Zoom Lens
Zoom Lens
Zoom Lens
Zoom Lens
Option Lens
Zoom/Focus
Power (Focus
Only)
Power
Power
Power
Power
Zoom Ratio
1.00
1.34
1.32
2.00
1.85
Throw Ratio
0.77 : 1
1.33 - 1.79 : 1
1.78 - 2.35 : 1
2.22 - 4.43 : 1
4.43 - 8.3 :
1
Lens Shift
Vertica
0
Max +0.5V
Max +0.5V
Max +0.5V
Max +0.5V
Horizontal
0
Max ±0.1H
Max ±0.1H
Max ±0.1H
Max ±0.1H
Weight
1.0kg
1.1kg
0.8kg
1.1kg
0.9kg
Screen Size
50 - 200inch
40 - 500inch
40 - 500inch
40 - 500inch
40 - 500inch
Brightness*
2-Lamp Mode
4200 ANSI lm
4600 ANSI lm
5200 ANSI lm
4600 ANSI lm
3600 ANSI lm
1-Lamp Mode
2100 ANSI lm
2300 ANSI lm
2600 ANSI lm
2300 ANSI lm
1800 ANSI lm
* This is the brightness in Normal
Mode. If the lamp mode is set to Eco Mode, brightness is
reduced by 85% of Normal Mode.
Projection range of
lens (image projected on a 100-inch screen)
Powerd
lens shift mechanism for simple adjustment of projected images
on screen and Keystone correction
With the powerd lens shift
mechanism, the position of projected images on screen can be
adjusted in both the vertical and horizontal directions
without moving the main unit. Furthermore, Keystone correction
corrects distortions in the vertical and horizontal directions
up to a maximum +/- 35 degrees in the horizontal direction and
a maximum +/- 40 degrees in the vertical direction.
Since
adjustment of lens zoom and focus, as well as Lens shift and
Keystone correction, can be operated by remote control, the
projector need not be installed within reach of the
speaker.
Specifications
Model Name
NP4000
DLP® Chip *1
Single DLP
chip, 1,024 x 768 pixels (Aspect Ratio 4 : 3)
Lens*2
Powered Zoom
/ Focus
Zoom Ratio
: 1 to 1.32 / Focus (F=1.7 to 1.9)(f=26 mm to 34 mm)
with NP08ZL
Powered
Sift*3
Horizontal
: max ± 0.1 H / Vertical : max + 0.5 V
Projection
Distance
1.42 m to
24.35 m with NP08ZL
Projection
Angle
8.9 degree
to 12.1 degree with NP08ZL
Lamp (Eco
Mode)
260 W (230
W) AC
Lamp Life *4 (Eco Mode)
2,000 H
(2,500 H)
Light
Output
Normal
Mode
5,200 ANSI
lumens Dual Lamp with NP08ZL
2,600 ANSI lumens Single
Lamp with NP08ZL
Eco Mode
Approx. 85
% of Normal
Contrast
Ratio (White / Black)
1000 : 1 /
2,100 : 1 with DynamicBlack™ *5
Quietness
(Eco Mode)
36 dB Dual
Lamp (34 dB Dual Lamp : Eco Mode)
Image Size
(Diagonal)
40 inch to
500 inch (1.02 m to 12.70 m) with NP08ZL
Maximum
Resolution
UXGA
(1,600 x 1,200)
Synchronization Range
Horizontal
15 kHz, 31kHz to 90 kHz
(RGB : 31 kHz or over)
Vertical
50 Hz to
85 Hz
Video
Bandwidth
RGB : 100 MHz ( - 3
dB)
Colour
Reproduction
Full
Colour, 16.7 Million Colours Simultaneously
Input
Terminals
3 Computer
Input
1 D-Sub Mini
15pin (Computer 1 IN)
1 BNC x 5 (Computer 2 IN)
Compatible signals
VGA, SVGA,
XGA, SXGA, SXGA+, UXGA
RGB (Analog)
0.7 Vp - p
/ 75 Ω
H / V Sync
4.0 Vp - p
/ TTL Polarity
Composite Sync
4.0 Vp - p
/ TTL Level
Sync on G
1.0 Vp - p
/ 75 Ω Negative Polarity
2 Stereo Mini Jack
Stereo L / R
0.5 Vrms /
22 kΩ or over
1 DVI-D (Computer 3
IN)
RGB (Digital)
T.M.D.S
Specification, with H.D.C.P , Max Resolution : SXGA+ /
60 Hz
1 Stereo Mini Jack
Stereo L / R
0.5 Vrms /
22 kΩ or over
2 Component
Inputt
1 RCA pin x
3
1 BNC x 5
(Sharing with Computer 2 IN)
Y
1.0 Vp - p
/ 75 Ω (with Sync), Terminal Y (Green) is Also Available
for Video Input
505 mm x
197 mm x 385 mm (Not Including Protrusions)
Net Weight
16.5
kg
*1 :
DLP Panel technology consists
of fine picture cells with more than 99.99 % of the
cells being active.
*2 :
Lenses are not attached to
the NP4000 main unit.
*3 :
The Lens Shift function is not
available for the NP06FL.
*4 :
Lamp life is defined as the average
time span for the brightness of the lamp to be reduced
by half, it dose not refer to the warranty period for
the lamp.
*5 :
DynamicBlack™ works only in 2 -
Lamp Mode.
*6 :
When the Lens Shift is Set as 0
% (H) / Vertical Offset = 50 %, Throw Ratio = 1.78
All specifications are
subject to change without
notice.
